dw
Junior Member
Posts: 95
|
Post by dw on Jan 22, 2013 20:37:06 GMT -4
Hey fellas,
Was wondering what the fuel mixture for the tanaka ted 232 tapper/drill. Cant remember for the life of me. Thanks in advance.
|
|
|
|
Post by scott blair on Jan 22, 2013 23:25:19 GMT -4
50:1 but I add a little extra to mine
|
|
dw
Junior Member
Posts: 95
|
Post by dw on Jan 22, 2013 23:43:54 GMT -4
Thanks Scott, I appreciate the info.
|
|
|
|
Post by Champlain Islander on Jan 23, 2013 7:56:38 GMT -4
I just use the little bottles of oil/ stabilizer that you can get at hardware stores now. 1 bottle per gallon of gas and the oil mix has some type of staybil to offset the ethanol problems.
|
|
|
|
Post by scott blair on Jan 23, 2013 11:51:54 GMT -4
I always mix my gas with sta-bil marine formula I put it in the boat every time I fill up too.
|
|
dw
Junior Member
Posts: 95
|
Post by dw on Jan 23, 2013 19:39:25 GMT -4
We use this stuff called Sea Foam in all our small engines at the fire station. seems to help with the ethanol issues. I ran my drill dry at the end of last season. Over the summer and fall I would put a couple capfulls in and let it run that off. Hope fully that has kept the carb from getting gummed up. Runs like a champ after it warms up. Thanks for the tips
|
|
|
|
Post by scott blair on Jan 23, 2013 21:27:57 GMT -4
It's good but burns very hot
|
|
